Seamless gutters, installed and repaired across the Miami Valley

Elite Gutters is a Dayton gutter company. We install new seamless gutter, repair what you already have, and fit guards that keep it clear. Tell us about your home and we will put a quote together, free.

Get a free quote 937-641-9225

Seamless gutter formed on site at your house, in aluminum or copper. Open 7am to 7pm, Monday to Friday.

Two Elite Gutters installers working at the roofline of a brick home, fitting a new run of seamless gutter.
Gutters is our focus Installation, repair and maintenance is the whole business, not a sideline.
Formed on site We run gutter to length at your house, so there are no joints along the run.
Aluminum or copper Five and six inch K-style as standard, with copper where you want it.
Quotes in writing We measure the house, then put the price in writing before anything starts.
What we do

Gutter installation, repair and everything after

Most homes need one of six things. Whichever it is, the same people who measure your house are the ones who hang the gutter.

A newly installed white seamless gutter running along a roofline against a clear sky.

Seamless gutter installation

New gutter for a home that has none, a full replacement when the old run is past saving, or gutter for new construction.

  • Five and six inch K-style
  • Aluminum or copper
  • Old gutter taken away when we finish
Get a quote for installation
Close-up of a hanger bracket clipped over the front lip of an aluminum gutter.

Gutter repair

Sagging runs, leaking corners and gutter that has pulled away from the house. Often a repair costs a fraction of a replacement.

  • Re-hanging sagging gutter
  • Resealing miters and end caps
  • Storm and emergency damage
Ask about a repair
An installer fitting a perforated metal gutter guard over an open gutter.

Gutter guards

Fitted with a new installation or added to the gutter you already have, so you are not back up a ladder every autumn.

  • Guards on new gutter
  • Guards on existing gutter
  • Matched to your roof and your trees
See how guards work
A gutter filled with wet leaves and shingle grit beside a partly covered guard.

Gutter cleaning

Clearing out leaves, shingle grit and the packed debris that stops water reaching the downspout in the first place.

  • Full clear out of the run
  • Downspouts flushed through
  • Debris taken with us
Book a clean
A finished downspout running down the brick corner of a home onto the stone below.

Downspouts and drainage

Where the water goes once it leaves the gutter decides whether it ends up in your basement or out on the lawn.

  • Downspout repair and replacement
  • Extensions and splash blocks
  • Leaf and debris diverters
Sort out the drainage
A worker repairing the fascia board beneath a roof edge before gutter is hung.

Fascia and soffit repair

The fascia is the board your gutter hangs from. If it has gone soft, new gutter fixed to it will not hold for long.

  • Fascia repair and replacement
  • Soffit repair
  • Done before the gutter goes up
Have the fascia checked
How we build

Formed on site, not cut from sections

Sectional gutter arrives in lengths and gets joined together along the run. Every joint is a place water can find its way out later. We bring the forming machine to your house and run the gutter to the exact length of each side, so the only joints are at the corners and the outlets.

  • Pitch set across the whole run. Water should move the length of the gutter, not pool in the middle.
  • Hidden hangers into the fascia. Screwed into solid board rather than nailed through the front lip.
  • Corners sealed by hand. The miters are where most older gutter starts to drip.
  • The old gutter leaves with us. Nothing is left in the yard for you to deal with.
Two Elite Gutters installers on ladders fitting a run of seamless gutter along a two storey brick home.
Gutter guards

Fewer trips up the ladder

A guard is worth having when the trees around your house drop enough to block the run every year. It is worth less if you have nothing overhanging the roof. We will tell you which of those you are, and fit guards to new gutter or to the gutter you already have.

Ask about guards Read the common questions
A perforated metal gutter guard fitted over a gutter along the edge of a roof.
Getting a quote

Three steps, and you know the price before we start

Quotes are free, and there is no obligation attached to asking for one.

Tell us about the house

Use the form below or call. Rough details are fine at this stage: how many storeys, what is going wrong, roughly when you would like it done.

We measure and price it

We come out, measure each side, check the fascia behind the old gutter, and work out what the job actually needs. Then you get the price in writing.

We fit it and clear up

Gutter is formed on site and hung the same visit in most cases. The old run and the offcuts go with us.

An Elite Gutters crew working from ladders along the side of a two storey brick home in the Dayton area.
Service area

Where we work

Dayton and the surrounding Miami Valley. If your town is not on the list, it is still worth asking.

Dayton Kettering Huber Heights Beavercreek Centerville Riverside Fairborn Vandalia Miamisburg Springboro Oakwood Bellbrook Englewood Clayton Trotwood West Carrollton Tipp City Troy Xenia West Milton
Questions

Things people ask before they book

Sectional gutter comes in fixed lengths and is joined together along the run, so a long side of a house might have several joints in it. Seamless gutter is formed on site to the exact length of each side, which means the only joints are at corners and downspout outlets. Fewer joints means fewer places for a leak to start.

Often, yes. Sagging runs can usually be re-hung, leaking corners can be resealed, and a damaged section can be swapped without redoing the whole house. When we measure we will tell you honestly which way it falls, including when the repair is the smaller job.

It depends on how many feet of gutter the house needs, how many storeys it is, whether it is five or six inch, aluminum or copper, and whether the fascia behind the old gutter needs work first. That is why we measure before quoting rather than giving a figure over the phone. The quote is free either way.

It comes down to what is growing around the house. If you have mature trees overhanging the roof and you are clearing the gutter every year, guards will save you the trip. If nothing overhangs, they are much less useful and we will say so.

Five inch K-style handles most houses in this area. Six inch moves noticeably more water and is worth considering on a large roof, a steep roof, or where long runs feed a small number of downspouts. We work it out from the roof area when we measure.

Dayton and the towns around it, including Kettering, Huber Heights, Beavercreek, Centerville, Riverside, Fairborn, Vandalia, Miamisburg, Springboro and further out across the Miami Valley. We are a mobile business, so we come to the house rather than you coming to us.

Free quote

Tell us about your gutters

Fill this in and we will get back to you to arrange a time to come out and measure. If you would rather just talk it through, feel free to call.

Please tell us your name

We need a number to call you back on

Please give us an email address we can reply to

Which town is the house in?

Pick the closest option, or choose the advice option

The more you tell us, the closer the quote will be before we even arrive.

We use your details to reply about your gutters and nothing else. See our privacy policy.